5100 | Awning Aluminum Window

5100 Awning Aluminum Window

We have been highlighted in many LEED certified projects since all Rhino windows have shown strong performance results through NFRC testing. The 5100 awning windows have been popular for high-end condo projects as well as many municipal and office buildings.

Our strength is in the ability to perform at a very high level in air infiltration, water resistance, and thermal performance. One of the key options we offer is factory mulling for combination windows such as hopper, awning, casement, and fixed windows. This option speeds up installation time and reduces field installation errors.

5100 Series | Features

Rated Awning Window

Rated Awning Window: AAMA AP-CW-PG60-AP/CW-PG55-AP rated awning window.

2 3/8" Thermally Broken Frame Depth

2 3/8" Thermally Broken Frame Depth: We use thermally broken frame and sash for improved thermal efficiency.

Reinforced Power Crimped Sash Corners

Reinforced Power Crimped Sash Corners: All sash corners are reinforced with two engineered corner keys which are hydraulically crimped, creating a corner built to last for years of trouble free operation.

Sash Overlaps Frame

Sash Overlaps Frame: Gerkin provides two compression seals on every sash and then overlaps the frame of the window with one of the seals. This design allows us to have one of the tightest windows available.

4-bar Friction Hinge

4-bar Friction Hinge: These hinges will provide easy operation and tension adjustments. Washable hinges are available for roto operation or push/pull manual operation.

Truth Roto Operators

Truth Roto Operators: We have eliminated the complaints of hard operating awnings by offering extra cranking power and a low gear for smooth trouble free operation.

Truth Maxim Multi-point Progressive Lock

Truth Maxim Multi-Point Progressive Lock: This multi-point lock system is very forgiving with a wide operating tolerance. The weather seal received from the system is incredibly tight.

Insulated Glass: Overall glass thickness options is 1". We offer several stocked glass options as well as numerous special order options.

Extruded Screen Frames: We use extrusions on all Rhino screen frames instead of lightweight roll form aluminum. Extruded screens are much more durable and save money in replacement costs.

Rhino Accessory Options: We offer complete subframe and panning systems, nail fins, snap trims, sill-flashing, strap anchors, stacking frames, structural mullions, mullion covers and factory applied extension jambs.

Other Options: We offer a louver system with a blank-off panel for PTAC units. Awnings are available in vertical or horizontal multi-window common frame configurations.

5100 Series | Test Results

NFRC - AAMA - Energy Star
U-Value w/LoÉ3/Argon .49
Solar Heat Gain Coefficient .20
Visible Transmittance .42
Condensation Resistance 37
U-Value Air Only* .52
Test Window | 49" x 72" Vert. 2-Lite
Class CW-PG60-AP
Air Infiltration .01 cfm/sq. ft.
Water 9.00 psf
Structural Wind Load 90.0 psf
Indoor/Outdoor Sound Transmission Class 28
Sound Transmission Class(w/ 1/4 LAM x 1/8 A) 36
Test Window | 61" x 68" Vert. 2-Lite
Class CW-PG55-AP
Air Infiltration .01 cfm/sq. ft.
Water 8.25 psf
Structural Wind Load 82.5 psf
Indoor/Outdoor Sound Transmission Class 28
Sound Transmission Class(w/ 1/4 LAM x 1/8 A) 36

*U-Values for our windows with 1/8" 366 LoÉ3 glass, air only, 1/8" clear glass, no muntins or argon in the air space.

Tested and Certified to AAMA/WDMA/CSA 101/I.S.2 A440-08
*U Values and CRF Values, tested with 1” insulating glass w/LoÉ3
U-Value/SHGC/VT/CRF Tested to NFRC 100/200/500

5100 Series | Colors

  • WhiteWhite
  • BronzeBronze
  • Clear AnodizedClear Anodized
  • Dark Bronze AnodizedDark Bronze Anodized