 |
 |
Stacking Frames |
|
|
 |
 |
|
All Rhino windows can be field stacked together using an integral stacking frame. (Sliders and single hungs require H channels for side stacking) Windows can be stacked at the head, sill and jambs, which allows for the creation of many window configurations. |
This accessory is used for side stacking single hungs and sliders together in the field. The H channel can be used for single hung sizes up to 48 x 72 and slider sizes up to 72 x 72. |
Structural Mullion |
Structural Stack |
||||
 |
 |
||||
This accessory provides additional support in large rough opening having multiple window configurations. The structural mullion is used vertically between windows to provide structure and can be anchored to the head and sill of a rough opening prior to installing the windows. |
|
||||
This accessory provides additional support in larger rough openings having multiple window configurations. The structural stack can be used both horizontally and vertically between windows to provide structural support. The structural stack is applied after the first window is installed and before the second window is installed. |
Sill Flashing |
Strap Anchors |
|
 |
 |
|
Gerkin offers an optional sill flashing that can be used either directly under the Rhino window or in conjunction with the subframe system. This flashing is extruded aluminum and extends 2 5/8" beyond the front of the window. |
Rhino hopper, awning, casement and fixed windows can be anchored into masonry conditions and extend over conditions such as expansion joints in which anchoring by traditional methods is not possible. The strap anchor allows the window anchor to be located up to 1 1/2" behind the window. |
PTAC Louvers |
 |
Gerkin can glaze 1" louvers into our window system for PTAC units. When louvers are used with windows, one rough opening can be created instead of two. (The window is stacked on top of the louver frame) This saves framing time and materials and gives a total matching system. Gerkin can provide a plank-off panel with appropriate cutouts to receive the PTAC unit. |