 |
 |
Our primary focus has been to manufacture energy saving window and door products. Throughout our history we have established ourselves as an innovator in the design and manufacturing capability of insulated windows and doors.
Stringent product testing and innovative design has allowed our products to evolve as market and consumer needs change. In the winter of 1989-90 we started to conceptualize and design our Rhino Commercial Aluminum window and door series. Today we have several commercial window styles in the Rhino line. This window and door series consists of a commercial horizontal slider, casement, single hung, double hung, hopper, awning, fixed and patio door. Each Rhino window reflects the design and manufacturing expertise we've implemented over the years. We also publish our AAMA test results to back up our claims of product performance and quality.
|
AAMA AP-CW-PG60-AP/CW-PG55-AP rated awning window. |
|
2 3/8" thermally broken frame depth: Gerkin uses thermally broken frame and sash for improved thermal efficiency. |
|
Reinforced power crimped sash corners: All sash corners are reinforced with two engineered corner keys which are hydraulically crimped, creating a corner built to last for years of trouble free operation. |
|
Sash overlaps frame: Gerkin provides two compression seals on every sash and then overlaps the frame of the window with one of the seals. This design allows Gerkin to have one of the tightest windows available. |
|
4-bar friction hinge: Four bar friction hinges will provide easy operation and tension adjustments. Washability hinges are available for roto operation or push/pull manual operation. |
|
Truth roto operators: Gerkin eliminates the complaints of hard operating awnings by offering extra cranking power and a low gear for smooth trouble free operation. |
|
Truth maxim multi-point progressive lock: This multi-point lock system is very forgiving with a wide operating tolerance. The weather seal received from the system is incredibly tight. |
Insulated Glass: Overall glass thickness options are 5/8" or 1". Gerkin offers several stocked glass options as well as numerous special order options. Extruded screen frames: Gerkin uses extrusions on all Rhino screen frames instead of lightweight roll form aluminum. Extruded screens are much more durable and save money in replacement costs. Rhino Accessory Options: Gerkin offers complete subframe and panning systems, nail fins, snap trims, sill-flashing, strap anchors, stacking frames, structural mullions, mullion covers and factory applied extension jambs. Other options: Gerkin offers a louver system with a blank-off panel for PTAC units. Awnings are available in vertical or horizontal multi-window common frame configurations. |
|
Model |
Class |
Test |
Air |
Water |
SWL1 |
U-Value |
SHGC2 |
VT3 |
Condensation |
Sound |
||
5100 |
CW-PG60-AP |
49"x72" |
.01 |
9.00 |
90.0 |
.49 |
.20 |
.42 |
39 |
|
||
5100 |
CW-PG55-AP |
61"x68" |
.01 |
8.25 |
82.5 |
.49 |
.20 |
.42 |
39 |
|
||
U-Value Air Only* - .52 |
||||||||||||
*U-Values for our windows with 1/8" 366 LoÉ3 glass, air only, 1/8" clear glass, no muntins or argon in the air space.
1Structural Wind Load • 2Solar Heat Gain Coefficient • 3Visible Transmittance
TESTED AND CERTIFIED TO AAMA/WDMA/CSA 101/I.S.2/A440-08
*U Values and CRF Values, tested with 1" insulating glass w/LoÉ3
U-VALUE/SHGC/VT/CRF TESTED TO NFRC 100/200/500
|
|
|
|
|
|
|
WHITE |
BRONZE |
CLEAR ANODIZED |
DARK BRONZE ANODIZED |
Note: Custom paint and anodized finishes are available.
